SOLID TIMBER
FLOORING
SOLID HARDWOOD
FLOORING manufactures a
unique
timber flooring system that reproduces all the aspects of a
traditional
timber floor in various species of both
Australian and Imported timbers,
including Jarrah, Taun, Tasmanian Oak,
Victorian Ash, Chestnut, Blue Gum,
Northern Silky Oak, Kempas, Rosewood,
Blackwood & Northern Box. All
timbers are kiln dried to manufacturer's
specifications to minimise on-site
expansion and contractions. The timber
boards are produced in widths that range
from 85mm to 135mm.
SOLID HARDWOOD
FLOORING is ideal for
both domestic and commercial
flooring: Houses, Apartments, Offices,
Restaurants, Hotels and Retail Outlets
where high traffic areas are prevalent.
SOLID HARDWOOD
FLOORING boasts 3
generations in timber flooring. The
system has been successfully utilised
throughout Australia for over 12 years.
The system assists the Forest Industry
in their efforts to sustain the precious
resource of timber.
PRODUCT SPECIFICATION
NAME:
Solid Timber Floor Covering.
SYSTEM: Solid
timber flooring overlay.
APPLICATION: Suitable for a wide range
of both domestic and commercial
installations, including shops,
restaurants, recreation floors
(gymnasiums), offices, public halls
(schools, theatres) etc.
SIZE:
Overall thickness installed:
Domestic - 14mm (approx.) Commercial -
14mm (approx)
TOP (WEAR) LAYER:
Solid timber overlay floor boards,
matching the wear layer thickness of
19mm Tongue &
Groove. Widths - 85mm - 135mm depending
on timber response.
Timber strip boards are pre-sanded. A
light sand is required on installation.
Timber strip boards are pre-glued.
Adhesion to glued underlay, when fixed
in accordance
with manufacturer's installation
instructions, is immediate.
TIMBER SPECIES: Jarrah, Taun, Tasmanian Oak,
Victorian Ash, Chestnut, Blue Gum,
Northern Silky Oak, Kempas, Rosewood,
Blackwood & Northern Box.
UNDERLAY:
Exterior grade ply and optional "Cellair"
acoustic foam. SHF also has available
solid cork rubber underlay matting
designed to maximise insulation;
acoustic performance; and impact
absorption.
ADHESIVE: Latex adhesive. This provides
an extra water resistant membrane
between timber strips And sub-floor.
Properties: * Water resistant *
Non-flammable * Rubber Latex * Non-toxic
SUB-FLOORS: All solid smooth dry
sub-strata including: Concrete,
Chipboard, Tiles, Timber,
Vinyl. Minimal floor levelling
preparation is required.
• A plastic membrane is laid on all
concrete floors as an added safeguard
against residual moisture in concrete
slabs.
• Can be installed over heated concrete
slabs after on site conditioning.
• SHF can moisture seal most concrete
slabs.
INSTALLATION PROCEDURES: Underlay can be
secured to sub-floor or remain unfixed
according to customer specifications.
Manufacturer's installation procedure
allows for an expansion gap of
approximately 12mm at perimeter of
installation area. Expansion gap will be
covered by LHF beading.
Option 1: If Beading is not a suitable
option we can cut your flooring in neat
to skirtings and finish with a silicone
bead around perimeter. This can only be
done when the underlays are secured to
the sub-floor.
Option
2: Skirtings to be removed and timber to
installed under skirtings.
FINISHES: Matte, Satin, Gloss or Semi
Gloss Polyurethane.
Properties: * Optional finish *
Non-toxic * Low maintenance
SANDING: Suitable for re-sanding as per
Australian Standards for solid timber
flooring.
PACKAGING: Shrink - Wrapped
for safe, dry transportation
MAINTENANCE: Refer to manufacturer's
guide
WARRANTY: Conditional for 10 years,
covering failure of the components in
the flooring system. Refer your supplier
for details.
DRY RECYCLED AIR & DIRECT SUN LIGHT MAY
CAUSE SHRINKAGE AND DISHING OF TIMBER. *
AVOID DIRECT SUNLIGHT AT ALL COSTS!
Contact us
|
